3 Series E91 330d (M57T2) TOUR
13 53 155
Removing and installing/replacing pressure
accumulator of fuel injection system (M57TU,
M57T2)
Necessary preliminary tasks:
•
Switch off ignition
•
Remove all pressure lines
Important!
It is essential to adhere to conditions of absolute cleanliness
when working on the fuel system.
•
Do not allow any dirt particles or foreign bodies to get into the
system
•
Use only fluff-free cloths
•
Remove all traces of dirt before removing pipes or individual
components
•
Seal all fuel system openings with protective caps
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
RA Removing and installing/replacing pressure accumulator of fuel injection system
BMW AG - TIS
17.02.2013 18:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
