3 Series E91 330d (M57T2) TOUR
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Release union nut on pressure line between pressure accumulator
and high-pressure pump.
Tightening torque 13 53 1AZ
.
Unlock and detach plugs (1 and 2).
Release screws and remove pressure accumulator (3).
Installation:
Check system for leaks.
RA Removing and installing/replacing pressure accumulator of fuel injection system
BMW AG - TIS
17.02.2013 18:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
