3 Series E91 330d (M57T2) TOUR
Recycling:
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
Unscrew all bolts.
BMW ALPINA B7 version.
Aluminium transmission sump with extending cooling fins.
Remove transmission sump (1).
Important!
GA6HP26Z plastic oil sump version only.
From 10/04 new M6x28.5 T40 Torx bolt can be retrospectively
replaced.
Installation:
Insert screws (2) until screw heads make contact.
Insert all further screws in diagonal sequence from inside to
outside until screw heads make contact.
Tightening torque: 24 11 5AZ.
Remove gasket (1) from transmission sump.
Clean transmission oil sump to remove residual oil.
Clean sealing faces and groove with a cloth.
Insert new gasket in transmission sump groove.
Important!
Do not degrease transmission sump with cleaning agent.
RA Removing and installing/sealing or replacing transmission sump (GA6HP26Z/6HP32Z)
BMW AG - TIS
17.02.2013 20:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
