3 Series E91 330d (M57T2) TOUR
Accommodate coil spring with spring plate with special tools
31 3 355 , 31 3 358 and 31 3 354 .
Twist coil spring until lower end of coil spring (1) is flush with
end (2) of special tool 31 3 355 .
Warning!
Do not compress coil spring to full extent.
Special tool 31 3 354 and centering ring 31 3 358 must
rest correctly on upper spring plate!
Lower coil of coil spring must rest completely in recess of
special tool 31 3 355 !
Tension coil spring.
Check auxiliary damper (1), gaiter (2) and spring pad (3) for
damage, replace if necessary.
Note:
Make sure spring pad (3) is correctly seated on shock absorber.
Insert shock absorber in tensioned coil spring.
Attach thrust washer (2) to piston rod.
Check support bearing (1) for damage, replace if necessary.
Attach dust sleeve and support bearing to piston rod.
RA Replacing front left or right spring strut shock absorber
BMW AG - TIS
17.02.2013 23:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
