3 Series E91 330d (M57T2) TOUR
Expose return line up to connection on power steering gear.
Release banjo bolt and disconnect return line.
Installation:
Replace all sealing rings.
Make sure return line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 10AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering (M57T2)
BMW AG - TIS
18.02.2013 00:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
