3 Series E91 330d (M57T2) TOUR
34 52 550
Removing and installing / replacing DSC
sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove left front seat
•
Remove front left entrance cover strip
Lift carpet (1) and fold back to side.
Remove underlay (2).
Disconnect plug connection.
Installation:
Ensure proper locking of plug connector.
Slacken screws (3)
Release screws (4) and remove bracket with yaw sensor.
Installation:
Tightening torque 34 51 3AZ
.
RA Removing and installing / replacing DSC sensor
BMW AG - TIS
18.02.2013 02:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
