3 Series E91 330d (M57T2) TOUR
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 220 mm from roof edge
Measurement b = approx. 375 mm from centrepoint of hole dia. 25 mm.
Measurement c = approx. 150 mm
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2).
-
Weld in reinforcing panels at all severance cuts.
Open weld joints in areas (1).
Open brazed joints in area (2).
Installation:
When adjusting new part to fit, cut off tabs (2) of reinforcement
on both sides of severance cut (1).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
18.02.2013 03:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
