3 Series E91 330d (M57T2) TOUR
51 21 330
Removing and installing/replacing window
cavity cover strip on inner front door
Necessary preliminary tasks:
•
Remove front door trim panel
Important!
The "Instructions on fitting window guide seals" serve as the
basis for this repair instruction and must be observed without
fail.
Lever out cover (1) at rear slightly.
Start at rear with removal of window cavity cover strip (2).
Pull off window cavity cover strip (1) towards top.
Installation:
If necessary, replace faulty retainers (3).
Insert window cavity cover strip (1) below cover (2).
Installation:
Moisten window cavity cover strip (1) prior to fitting with
approved anti-friction agent .
Start with installation at front.
RA Removing and installing/replacing window cavity cover strip on inner front door
BMW AG - TIS
18.02.2013 04:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
