bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

21 RA Removing And Installing_replacing Tension Strut (on Rear Axle) > < 19 RA Removing And Installing Rear Spoiler|Page 1943
Page 1
background image

51 71 447

Removing and installing or replacing panel
for cover on left or right side member

Necessary preliminary tasks:

Detach wheel arch cover from front/rear side member cover

Release screws (1).

Unclip panel (1) at holders (2) in direction of arrow and remove.

Installation:

Before installation, soak holders (1) in water.

If necessary, detach holders (1) from body and fit on panel (3).

If necessary, detach grommets (2) from holders (1) and place
on body.

If necessary, replace faulty holders (1) and grommets (2).

RA  Removing and installing or replacing panel for cover on left or right side membe

BMW AG - TIS

18.02.2013  06:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

21 RA Removing And Installing_replacing Tension Strut (on Rear Axle) > < 19 RA Removing And Installing Rear Spoiler|Page 1943