bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing _ Replacing Flexmat On Left Or Right Front Seat > < 2 RA Removing And Installing Left Or Right Front Seat (normal _ Manual)
Page 2
background image

Release screws (1).

Installation:

Replace screws.

Tightening torque 52 10 1AZ

.

Move front seat as far back as possible.

Release screws (3).

Installation:

Replace screws.

Tightening torque 52 10 1AZ

.

Unlock plug connection (1) and disconnect plug (2).

Important!

Cover door sill with protective covers (risk of damage).

Lift out front seat.

Installation:

Carpet must not get between seat rails and floor pan in area of
fastening points (grating noises).

RA  Removing and installing left or right front seat (normal / manual)

BMW AG - TIS

18.02.2013  06:55

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

3 RA Removing And Installing _ Replacing Flexmat On Left Or Right Front Seat > < 2 RA Removing And Installing Left Or Right Front Seat (normal _ Manual)