3 Series E91 330d (M57T2) TOUR
Installation:
Ensure correct installation sequence:
1.
Sliders for floating roofliner
2.
Locking lever for floating roofliner
3.
Rear drive cable plate with drive cable
Slide in locking lever for floating roofliner (3) and slide up to
recess in guide frame.
Open locking lever (1) with screwdriver.
Slide rear drive cable plate (2) into locking lever.
Note:
Correct insertion can be checked by pulling back the drive cable
plate (2):
Drive cable plate (2) and locking lever for floating roofliner (3)
must execute a joint movement.
In addition, the correct spacing of locking lever (3) and drive
cable plate (2) is determined by the floating roofliner cover
plate.
RA Removing and installing/replacing mechanism for floating roofliner
BMW AG - TIS
18.02.2013 07:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
