3 Series E91 330d (M57T2) TOUR
54 13 050
Replacing seal for slide/tilt sunroof lid at rear
Necessary preliminary tasks:
•
Open glass slide/tilt sunroof
Note:
Follow repair instructions for bonded seals on glass slide/tilt
sunroof.
Detach seal (1) from slide/tilt sunroof lid.
Installation:
Clean bonding surface with adhesive remover (sourcing
reference: BMW Parts Service).
Press seal without stretching (squashing).
Important!
Do not touch bonding surface.
Surface temperature
≥
20
°
C
Incorrect bonding of the seal will result in leakage.
RA Replacing seal for slide/tilt sunroof lid at rear
BMW AG - TIS
18.02.2013 07:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
