bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Switch For Hazard Warning Flashers_central Loc > < 8 RA Removing And Installing_replacing Centre Console Switch Cluster (without CCC_ASK
Page 1
background image

61 31 054

Removing and installing/replacing centre
console switch cluster (with CCC/ASK)

Necessary preliminary tasks:

Remove decorative strip on instrument panel on right

Remove operator unit for heater/air conditioner

Unclip trim (3) at fastening points (1) and (2).

Feed out associated ribbon cable and remove trim (3) complete
with centre console switch cluster (4).

Replacement:

Unclip centre console switch cluster (1) at fastening
points (2) and (4) and remove.

Note:

Ribbon cable (3) of centre console switch cluster (1) leads to
heater/air conditioner operator unit.

Installation:

Make sure centre console switch cluster (1) engages correctly in
upper fastening points (4) and lower fastening points (2).

RA  Removing and installing/replacing centre console switch cluster (with CCC/ASK)

BMW AG - TIS

18.02.2013  08:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Switch For Hazard Warning Flashers_central Loc > < 8 RA Removing And Installing_replacing Centre Console Switch Cluster (without CCC_ASK