3 Series E91 330d (M57T2) TOUR
61 61 270
Removing and installing/replacing bracket for
windscreen wiper system complete with
motor
Necessary preliminary tasks:
•
Remove both wiper arms
•
Remove lower section of microfilter housing
•
Remove cowl panel cover
•
Remove both tension struts from spring strut dome
Release screws (2) from left heater bulkhead (3).
Remove left heater bulkhead (3) towards top.
Unclip cable (1) for wiper motor from holder.
Release screws (5) for wiper bracket (4).
Tightening torque, 61 61 6AZ
.
Remove wiper bracket (4) upwards.
Disconnect plug for wiper motor.
Installation:
Rubber mount (1) and rubber guide (3) must not be missing.
Rubber guide (3) must be correctly seated in guide (2).
RA Removing and installing/replacing bracket for windscreen wiper system complete w
BMW AG - TIS
18.02.2013 09:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
