bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Fluid Reservoir For Windscreen Washer System|Page 2409 > < 2 RA Removing And Installing_replacing A Spray Nozzle In Windscreen Washer System|Page 2407
Page 1
background image

61 71 061

Replacing fluid reservoir for windscreen
washer system

Necessary preliminary tasks:

Remove front right auxiliary turn indicator light

Remove right wheel arch cover

Clip cable (1) out of mounting.

Clip hose (5) out of mounting.

Unlock filler hose (2) and detach from fitting on fluid
reservoir (3).

Note:

Catch any escaping washer fluid if necessary.

Unscrew screws (4) and (6).

Pull fluid reservoir (3) forwards slightly.

Installation:

Retaining lug (2) of fluid reservoir (1) must be correctly seated in
clip (3).

Unlock and disconnect all plug connections.

Remove level switch  (1).

Remove windscreen washer pump (3) .

If necessary, remove washer pump for rear window washer
system (2) .

If necessary, remove washer pump for headlight washer
system (4) .

Remove washer reservoir.

RA  Replacing fluid reservoir for windscreen washer system

BMW AG - TIS

18.02.2013  09:25

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Fluid Reservoir For Windscreen Washer System|Page 2409 > < 2 RA Removing And Installing_replacing A Spray Nozzle In Windscreen Washer System|Page 2407