bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Left (or Right) Rear Light (in Side Panel) > < 5 RA Removing And Installing_replacing Left Or Right Tail Light (on Rear Lid)
Page 2
background image

Slacken nut (1) until clamping jaw (2) on rear lid (3) can be
unlatched.

Tightening torque  63 21 1AZ

.

Fold rear light (4) outwards out of rear lid (3) and remove.

 

Installation:

Make sure clamping jaw (2) is correctly seated on rear lid (3).

Position lugs (5) of rear light (4) exactly over side edge of rear
lid (3).

Installation:

Make sure seal (1) is correctly seated on rear light (2).

Replacement:

If necessary, remove bulbs.

RA  Removing and installing/replacing left or right tail light (on rear lid)

BMW AG - TIS

18.02.2013  09:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

6 RA Removing And Installing_replacing Left (or Right) Rear Light (in Side Panel) > < 5 RA Removing And Installing_replacing Left Or Right Tail Light (on Rear Lid)