3 Series E91 330d (M57T2) TOUR
Necessary preliminary tasks:
•
Remove right decorative trim on instrument panel
Note:
Unclip the heater/air conditioner operator unit (2) by
simultaneously
•
levering out using special tool 00 9 340
•
pulling on the relevant control button (3).
Fit special tool 00 9 340 on either side as illustrated.
Unclip heater/air conditioner operator unit (2) complete with
trim (1) at fastening points (4) and pull back.
Unlock associated plug connections and disconnect.
Remove heater/air conditioner operator unit (2) complete with
trim (1).
Replacement:
Carefully unclip operator unit trim (1) at inner retaining points (2)
only.
Important!
Risk of damage to operator unit!
Carefully unclip operator unit trim (1) at outer retaining
points (2) only.
Remove trim (1) from operator unit (3).
Important!
Risk of damage to operator unit (3)!
RA Removing and installing/replacing heater/air conditioner operator unit (version
BMW AG - TIS
18.02.2013 10:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
