3 Series E91 330d (M57T2) TOUR
Release screw (1).
Lever out retainer (2).
Remove condenser (3) towards rear.
Installation:
Make sure retaining clips are correctly seated in area (4).
Installation:
Make sure condenser (1) is securely seated in area (2).
After installation:
•
Evacuate and fill A/C system
•
Fill and vent cooling system and check for leaks
RA Removing and installing or replacing condenser for A/C system
BMW AG - TIS
18.02.2013 10:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
