3 Series E91 330d (M57T2) TOUR
66 20 565
Removing and installing/replacing front
signal sensor (Park Distance Control)
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
Disconnect plug connection (1).
Unclip signal sensor on both sides from fixture (1).
Installation:
Signal sensor (2) must snap audibly into retaining tabs.
RA Removing and installing/replacing front signal sensor (Park Distance Control)
BMW AG - TIS
18.02.2013 11:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -