bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Front Left Or Right Lower Belt Fitting (seat B|Page 2791 > < 4 RA Removing And Installing_replacing Front Left Or Right Seat Belt|Page 2789
Page 1
background image

72 11 041

Removing and installing/replacing front left or
right lower belt fitting (seat belt tensioner)

Necessary preliminary tasks:

Remove front seat

Warning!

Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.

Improper handling can lead to triggering of the pyrotechnical
seat belt tensioner or side airbag, resulting in injuries.

Switch off ignition!

Unfasten plug connection (1) and disconnect.

Unlock plug connection (3) and pull all plugs out of plug
housing (2).

Disconnect all cable straps.

Removing wiring harness.

Installation:

Replace cable straps

Wires must not be under tension

Plugs are coded and must be reinstalled in the correct

sequence in the plug housing

RA  Removing and installing/replacing front left or right lower belt fitting (seat b

BMW AG - TIS

18.02.2013  12:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Front Left Or Right Lower Belt Fitting (seat B|Page 2791 > < 4 RA Removing And Installing_replacing Front Left Or Right Seat Belt|Page 2789