3 Series E91 330i (N52) TOUR
Note:
For purposes of clarity, following graphics show roofliner removed.
Release screw (1), slacken screw (3) and turn
countersupport holder (2) back in direction of arrow.
Disconnect plug connection (1, 2).
Unfasten screw (3) and remove blocking circuit.
Installation:
Align blocking circuit to body by way of screw and positioning pin.
RA Removing and installing or replacing blocking circuit
BMW AG - TIS
18.02.2013 11:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -