3 Series E91 330xi (N52) TOUR
11 12 719
Resurfacing cylinder head sealing face (N52)
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove exhaust camshaft.
•
Remove intermediate lever on inlet side.
Check evenness of cylinder head sealing faces with a standard
straight-edge (1).
Note:
Max. deviation from level (longitudinal) 0.10 mm
Check evenness of cylinder head sealing faces with a standard
straight-edge (1).
Note:
Max. deviation from level (transversal) 0.05 mm
Check cylinder head for water leaks.
Assemble engine.
RA Resurfacing cylinder head sealing face (N52)
BMW AG - TIS
20.02.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
