3 Series E91 330xi (N52) TOUR
18 40 060
Removing and installing/replacing rear
exhaust manifold (N52/ N52K/ N51)
Necessary preliminary tasks:
•
Remove ignition coil cover
•
Remove coolant expansion tank
•
Remove underbody protection
•
Remove complete exhaust system
Note:
The oxygen sensors are in danger of being damaged when the
exhaust manifolds are removed and installed.
Remove control sensor from cylinders 4 to 6.
Remove monitor sensor from cylinders 4 to 6.
Unscrew nuts.
Remove exhaust manifold (1).
Installation:
Clean sealing faces and replace seals.
Replace nuts.
Tightening torque, 18 40 1AZ
.
RA Removing and installing/replacing rear exhaust manifold (N52/ N52K/ N51)
BMW AG - TIS
20.02.2013 23:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
