3 Series E91 330xi (N52) TOUR
Unscrew all bolts.
Remove transmission sump (1).
Important!
Transmission with plastic oil sump
From 11/04 new bolt with M6x28.5 T40 Torx head can be
retrospectively replaced.
Installation:
Insert screws (2) until screw heads make contact.
Insert all further screws in diagonal sequence from inside to
outside until screw heads make contact.
Tightening torque: 24 11 5AZ
.
Remove gasket (1) from transmission sump.
Clean sealing faces and groove with a cloth.
Insert new gasket in transmission sump groove.
Important!
Do not degrease transmission sump with cleaning agent.
Replace sealing ring (1) on oil filter tube.
Installation:
The gasket is correctly installed when it is engaged in the locating
opening of the transmission sump.
RA Removing and installing/sealing or replacing transmission sump (GA6HP19Z)
BMW AG - TIS
21.02.2013 02:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
