3 Series E91 330xi (N52) TOUR
Disconnect plugs (1) and (2) from servomotor.
Release screws.
Remove transmission cross-member.
Tightening torque 27 00 10AZ
.
Release screw connection of transfer case.
Tightening torque 27 00 9AZ
.
Remove transfer case.
Installation:
Pay attention to dowel pin (1).
Grease dowel pin (1).
Apply a thin coat of grease to splines.
Grease: WEICON ANTI-SEIZE.
RA Removing and installing transfer case (ATC 300)
BMW AG - TIS
21.02.2013 03:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
