3 Series E91 330xi (N52) TOUR
27 10 710
Replacing classification resistor for
servomotor (ATC 300)
Important!
Delete previous resistance values when replacing the resistor.
Using BMW diagnosis system, work through test program in
accordance with instructions.
Disconnect connector (1).
Release screw (3) and remove resistor.
Tightening torque 27 00 14AZ
.
RA Replacing classification resistor for servomotor (ATC 300)
BMW AG - TIS
21.02.2013 03:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
