3 Series E91 330xi (N52) TOUR
Guide joint tightly seated in swivel bearing:
Important!
The guide joint must be replaced once it has been driven out
with the special tool.
Unscrew nut and screw special tool 33 4 205 onto guide joint.
Drive guide joint out of swivel bearing with special tool 33 4 200 .
If necessary, screw nut (1) onto guide joint by a few turns.
If necessary, replace lower section 31 2 242 with lower
section 31 2 246 .
Press guide joint with special tool 31 2 240 out of compression
strut.
Unscrew nut (1) and remove guide joint.
Installation:
Keep journal on guide joint and bushing in compression strut
clean and free from oil and grease.
RA Removing and installing/replacing guide joint in swivel bearing (AWD)
BMW AG - TIS
21.02.2013 03:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
