3 Series E91 330xi (N52) TOUR
Remove front brake disk
Force drive flange with special tools 33 2 116 / 33 2 201 ,
33 2 160 , 33 4 200 and 5 wheel bolts out of wheel bearing.
Note:
Rounded inside edge of special tool 33 2 160 must point to drive
flange.
Detach inner wheel bearing race from drive flange.
Remove swivel bearing and clamp with aluminium clamping jaws
in vice.
Important!
The bearing was destroyed when the wheel hub was removed
and must not be reused!
Lift out retaining ring (1).
Pull out bearing with special tools 31 2 113 , 33 4 261 ,
33 3 266 and 33 3 261 .
Note:
The bearing can be forced out of the swivel bearing on a press.
Check dust sleeve, replace if necessary.
RA Replacing bearing for front wheel (AWD)
BMW AG - TIS
21.02.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
