3 Series E91 330xi (N52) TOUR
33 10 010
Removing and installing/replacing rear
differential
Special tools required:
•
33 4 420
Important!
Use only approved rear differential oils!
Note:
The following sequence was created using the E91 with N46 as
an example. Differences in detail (e.g. due to vibration damper) in
other engines are possible.
Necessary preliminary tasks:
•
Remove propeller shaft from rear differential
•
Remove output shaft from rear differential at both ends and
tie back
Warning!
Danger of injury!
Failure to comply with the following instructions may result
in the vehicle slipping off the lifting platform and critically
injuring other persons.
When supporting components, make sure that
•
the vehicle can no longer be raised or lowered
•
the vehicle does not lift off the locating plates on the
lifting platform
RA Removing and installing/replacing rear differential
BMW AG - TIS
21.02.2013 04:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
