3 Series E91 330xi (N52) TOUR
34 21 320
Removing and installing/replacing both brake
disks
Special tools required:
•
34 1 280
Necessary preliminary tasks:
•
Remove wheels
•
Remove and clean brake pads
Check minimum brake disc thickness:
-
Position special tool 34 1 280 at three measuring points in
area (1) and measure.
-
Compare measurement result and lowest value with setpoint
value.
Note:
New brake linings may only be installed if the brake disc thickness
is greater than or equal to the minimum brake disc thickness (MIN
TH).
If the brake discs are replaced, you must also fit new brake pads.
Always replace brake discs in pairs.
RA Removing and installing/replacing both brake disks
BMW AG - TIS
21.02.2013 05:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
