3 Series E91 330xi (N52) TOUR
37 14 511
Replacing front ride-height sensor (AWD)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Release nut (1) and disconnect jointed rod.
Tightening torque 37 14 3AZ
.
Release screws (3), remove ride-height sensor and disconnect
plug connection (4).
Installation:
Sensor lever (2) must point from ride-height sensor to left front
wheel.
Tightening torque 37 14 1AZ
.
After installation:
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor (AWD)
BMW AG - TIS
21.02.2013 06:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -