3 Series E91 330xi (N52) TOUR
41 11 516
Replacing front left or right support carrier
(partial replacement, front side panel
removed)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU 41 11 516)
for details of stripping-down and rigging work.
Use only approved spot-welding apparatus for repairs.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Support carrier, wheel arch, outer
Mark severance cut in accordance with measurement a and cut
support carrier.
Measurement a=240 mm from edge of rectangular hole.
Open weld joints in areas (1).
RA Replacing front left or right support carrier (partial replacement, front side p
BMW AG - TIS
21.02.2013 06:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
