3 Series E91 330xi (N52) TOUR
Turn cover (1) through approx. 45
°
and lever out in direction of
arrow.
Press retaining strap (1) inwards and remove.
Remove cover (2).
Remove rubber pad (3).
Insert a suitable tool through bores (3) and release catches.
Installation:
Make sure seal (4) is correctly seated.
Installation:
Catches (1) on ejector (2) must not be damaged.
Check protective cap (3) for correct seating.
Installation:
Locks (1) on left/right of cover (2) must not be damaged.
RA Replacing cover bowl
BMW AG - TIS
21.02.2013 08:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
