3 Series E91 330xi (N52) TOUR
51 24 100
Removing and installing/replacing rear lid
lock
Necessary preliminary tasks:
•
Remove panel for rear lid
Release screws (1).
Tightening torque 51 24 1AZ
.
Pull out rear lid lock (1) slightly.
Disconnect Bowden cable (2).
Disconnect plug connection (3) and remove rear lid lock (2).
RA Removing and installing/replacing rear lid lock
BMW AG - TIS
21.02.2013 09:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
