bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing_replacing Rear Window|Page 1881 > < 8 RA Replacing Left Or Right Gutter Strip Along Windscreen|Page 1879
Page 1
background image

51 31 200

Removing and installing/replacing rear
window

Necessary preliminary tasks:

Remove rear spoiler

Disconnect all plug connections on aerial/antenna amplifier

Feed out rubber grommet (1) on left/right with cable.

Note:

This work step must be carried out with a second person
assisting.

Slacken nuts (1) on left/right. 

If shims (2) are in place, remove them and make a note of their
number and positions.

Release nuts (1) on left/right and remove rear window.

Set rear window down on a clean surface.

Important!

The rear window must not be pulled or lifted by its plugs, wires
or foil conductor (risk of damage).

RA  Removing and installing/replacing rear window

BMW AG - TIS

21.02.2013  09:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Rear Window|Page 1881 > < 8 RA Replacing Left Or Right Gutter Strip Along Windscreen|Page 1879