3 Series E91 330xi (N52) TOUR
51 47 000
Removing and installing/replacing front
(inside) left or right entrance cover strip
Special tools required:
•
00 9 317
Important!
Do not raise entrance cover strip (1) over entire length
simultaneously.
Using special tool 00 9 317 , unclip entrance cover strip (1)
from clips (2) starting at rear and proceeding forwards.
If necessary, lever clips (1) out of floor pan (2) and attach to
entrance cover strip.
Installation:
If necessary, replace faulty clips (1) on entrance cover
strip (2).
RA Removing and installing/replacing front (inside) left or right entrance cover st
BMW AG - TIS
21.02.2013 10:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
