3 Series E91 330xi (N52) TOUR
51 71 481
Removing and installing/replacing tension
strut (on rear axle)
Special tools required:
•
00 9 120
Important!
Vehicles must not be driven without tension struts.
Driving without tension struts may damage the vehicle body.
Tension strut screws must be tightened to torque and then
tightened down with special tool 00 9 120 .
Release screws (1) and remove tension strut (2).
Installation:
Replace screws.
Tightening torque 51 71 3AZ
.
RA Removing and installing/replacing tension strut (on rear axle)
BMW AG - TIS
21.02.2013 10:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -