3 Series E91 330xi (N52) TOUR
After fitting seat cover, enable OC3 mat with BMW diagnosis
system.
Enabling seat occupancy detector (OC3 mat):
•
Connect BMW diagnosis system
•
Release seat occupancy detector
•
Clear fault memory if necessary
Version with seat heating only:
Unfasten plug connection (1) and disconnect.
Disconnect cable straps.
Release wiring harness (2) from cable holders on seat
mechanism.
Important!
Feed the wiring harness carefully through the seat and
backrest mechanism as the edges of the frame can be sharp.
Release screw (1).
Remove trim (2) from inside of seat.
Lever clip (1) out of seat cover on left and right.
Installation:
If necessary, replace faulty clip.
RA Replacing seat cover on left or right front seat (normal/manual)
BMW AG - TIS
21.02.2013 11:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
