bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing Complete Glass Slide_tilt Sunroof|Page 2262 > < 8 RA Removing And Installing Complete Glass Slide_tilt Sunroof
Page 2
background image

Important!

Read and comply with notes on protection against
electrostatic discharge (ESD protection).

Close floating roofliner until roof-mounted aerial is accessible.

Unfasten plug connection (1) and disconnect.

Unclip Omega cable tie (2).

Unlock and disconnect plug connection (3) at control unit.

Installation:

Initialize glass slide/tilt sunroof.

Important!

Airbag lead (1) must not be damaged.

Detach metal tab clips with airbag lead (1) from glass slide/tilt
sunroof frame.

Installation:

Lay airbag lead (1) without tension or kinks.

RA  Removing and installing complete glass slide/tilt sunroof

BMW AG - TIS

21.02.2013  12:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

8 RA Removing And Installing Complete Glass Slide_tilt Sunroof|Page 2262 > < 8 RA Removing And Installing Complete Glass Slide_tilt Sunroof