bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Wiring Harness In Left Or Right Rear Door > < 4 RA Replacing Battery Negative Lead|Page 2304
Page 1
background image

61 12 200

Replacing wiring harness in left or right front
door

Necessary preliminary tasks:

Close front side window completely

Remove front door trim panel

Remove front acoustic insulation

Unlock plug connection (1) on door lock and disconnect.

Unlock plug connection (4) on power window and disconnect.

Disconnect plug connection (2) on outside door handle light.

Disconnect plug connection (5) on door mirror.

Unclip door wiring harness at points (3).

 

Installation:

Make sure door wiring harness is correctly laid.

Release screw (1), fold door wiring harness plug on A-pillar (2)
downwards slightly and remove.

Unlock plug connection behind and disconnect.

Pull rubber grommet (3) out of front door.

Feed out door wiring harness towards front to A-pillar and remove.

RA  Replacing wiring harness in left or right front door

BMW AG - TIS

21.02.2013  12:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Replacing Wiring Harness In Left Or Right Rear Door > < 4 RA Replacing Battery Negative Lead|Page 2304