bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Replacing Ignition Unit For Left Xenon Headlight (with Xenon Bulb)|Page 2536 > < 8 RA Replacing Control Unit For Right Xenon Headlight
Page 1
background image

63 12 870

Replacing ignition unit for left xenon
headlight (with xenon bulb)

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).

Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.

Follow instructions for handling light bulbs (exterior lights).

Important!

Ignition unit and xenon bulb are viewed as a single
component and must not be separated.

Necessary preliminary tasks:

Remove front left wheel arch trim

Note:

Headlight removed for purposes of clarity.

 

Unlock both retaining tabs and remove cover (1) in direction of
arrow from headlight (2).

 

Installation:

Make sure cover (1) is correctly seated on headlight (2).

RA  Replacing ignition unit for left xenon headlight (with xenon bulb)

BMW AG - TIS

21.02.2013  14:17

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Replacing Ignition Unit For Left Xenon Headlight (with Xenon Bulb)|Page 2536 > < 8 RA Replacing Control Unit For Right Xenon Headlight