3 Series E91 330xi (N52) TOUR
Disconnect plug connection (1).
Release screws (2) and (3).
Detach bracket (4) complete with servodrives from heater/air
conditioner (5).
Installation:
Make sure bracket (4) is correctly seated on heater/air
conditioner (5).
Release screws (1).
Remove servodrive for footwell flap (2) from bracket (3).
Installation:
Place servodrive for footwell flap (2) over guide pin (4).
RA Replacing servodrive for footwell flap (automatic A/C)
BMW AG - TIS
21.02.2013 15:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -