3 Series E91 330xi (N52) TOUR
64 51 520
Removing and installing or replacing
expansion valve
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
Note:
If A/C system is opened for more than 24 hours:Replace desiccant
insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove lower section of microfilter housing
Release screws (1, 2), disconnect refrigerant lines and lay to one
side.
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 2AZ
.
RA Removing and installing or replacing expansion valve
BMW AG - TIS
21.02.2013 15:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
