bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing Or Replacing Condenser For A_C System|Page 2734 > < 7 RA Replacing Safety Pressure Switch|Page 2732
Page 1
background image

64 53 550

Removing and installing or replacing
condenser for A/C system 

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit.

If A/C system is opened for more than 24 hours:

Replace desiccant insert for A/C system 

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove radiator 

Release screws (1).

Disconnect suction and pressure lines and lay to one side.

Installation:

Replace all sealing rings and moisten with refrigerant oil.

Tightening torque 64 53 1AZ

.

RA  Removing and installing or replacing condenser for A/C system

BMW AG - TIS

21.02.2013  15:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Removing And Installing Or Replacing Condenser For A_C System|Page 2734 > < 7 RA Replacing Safety Pressure Switch|Page 2732