3 Series E91 330xi (N52) TOUR
65 11 080
Removing and installing/replacing radio
receiver
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove operator unit for heater/air conditioner
Note:
Comply with notes and instructions on handling optical
waveguides.
Release screws (1).
Pull back radio receiver (2) slightly.
Disconnect associated plug connections and remove radio
receiver (2).
Installation:
Make sure the rear guide pin of the radio receiver (2) is correctly
seated in the associated mounting.
RA Removing and installing/replacing radio receiver
BMW AG - TIS
21.02.2013 15:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
