3 Series E91 330xi (N52) TOUR
65 75 055
Removing and installing/replacing emergency
power siren with tilt sensor
Necessary preliminary tasks:
•
Remove rear left wheel arch cover
Release screws (1) and lower complete mounting plate (2).
Unlock and disconnect associated plug connection, remove
complete mounting plate (2).
Release nut (1) and remove emergency power siren with tilt
sensor (2) from mounting plate (3).
RA Removing and installing/replacing emergency power siren with tilt sensor
BMW AG - TIS
21.02.2013 16:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
