3 Series E91 330xi (N52) TOUR
66 20 560
Removing and installing/replacing rear signal
sensor (Park Distance Control)
Vehicles with HiFi or Top HiFi system:
No acoustic sensors fitted because the PDC control unit activates
the respective speaker on the side of obstruction.
Necessary preliminary tasks:
•
Remove roller cover from luggage compartment.
•
Fold right rear seat backrest forwards
•
Remove cover for capping on right
Disconnect plug connection (1).
Release screw (3) and remove signal sensor (2).
Replacement:
Detach holder from signal sensor.
If necessary, mark position of signal sensor (2) on holder.
Make sure signal sensor is securely seated.
RA Removing and installing/replacing rear signal sensor (Park Distance Control)
BMW AG - TIS
21.02.2013 16:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
