3 Series E91 330xi (N52) TOUR
66 31 ...
Replacing screws on ACC sensor unit
Necessary preliminary tasks:
•
Remove ACC sensor
Important!
Visually inspect sensor housing for damage/leaks.
Replace ACC sensor if sensor housing is damaged.
Grip sensor housing (1) by screw in a vice (2).
Release screw by turning sensor housing (2).
Important!
After releasing screws, check sensor housing (1) again for
damage.
Replace ACC sensor if sensor housing (1) is damaged.
Note:
For purposes of clarity, graphic show ACC sensor holder
removed.
Replace plastic nuts (1).
RA Replacing screws on ACC sensor unit
BMW AG - TIS
21.02.2013 16:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
