3 Series E91 330xi (N52) TOUR
Cruise control can be reactivated after the ACC sensor has been cleaned.
•
Bends cannot be detected in an anticipatory manner
Active Cruise Control is unable to work in an anticipatory manner when the vehicle is cornering. It is only
able to react to existing lateral acceleration when it is already on the bend. For this reason, the driver is
responsible for ensuring that an appropriate speed is being driven as the vehicle enters the bend.
•
Active Cruise Control deactivated after DSC intervention or brake application by the driver
Cruise control will be deactivated following DSC intervention or a brake application by the driver. (DSC
intervention in the sense of enhanced operating stability.)
Cruise control will then have to be reactivated at the cruise control system steering-column stalk.
Operation
The range of adjustments for the different cruise control systems are described in the Owner's Handbook.
Notes for service staff
Service staff should note the following points:
-
General note: [more ...]
-
Diagnosis: ---
-
Encoding/programming: ---
National versions
US and CDN national versions
Different timed separations encoded for following mode (1.5 - 1.8 - 2.2 - 2.5 seconds)
US and GB national versions
The option "Active Cruise Control" is effective in the speed range 20 mph to 110 mph.
Speed can be selected in steps of 1 mph and 5 mph.
Subject to change.
SBT Cruise control E90, E91, E92, E93
BMW AG - TIS
22.02.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
