bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Replacing Return Line For Power Steering (M57T2 335d)|Page 951 > < 13 RA Replacing Cooler Return Line For Power Steering|Page 949
Page 1
background image

32 41 351

Replacing return line for power steering
(M57T2 335d)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Release quick-connect coupling and seal cooling coil connection
with a suitable plug.

Installation:

Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.

RA  Replacing return line for power steering (M57T2 335d)

BMW AG - TIS

22.02.2013  20:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Replacing Return Line For Power Steering (M57T2 335d)|Page 951 > < 13 RA Replacing Cooler Return Line For Power Steering|Page 949